Ordina per: N° Art. Marca Prezzo in CHF

Binding Glue, 20 ml

N° Art.: WSF20 Marca: Göldo Unità: Netto PVI / cadauno: CHF 12.40
Special adhesive for plastic binding.

Double Edge Nut File, Set

N° Art.: WS038 Marca: Göldo Unità: Netto PVI / cadauno: CHF 105.00
Nut file set of three files with two different sizes: .010/.026, .013/.036 und .017/.046 inches.

Fret Crowning File

N° Art.: WS039 Marca: Göldo Unità: Netto PVI / cadauno: CHF 25.30
High grade file for accurate fret shaping. Two 3mm fine cutting edges. Suitable for most fret sizes (except very narrow vintage or mandolin fretwire). Length incl. wooden handle 25cm, width 16mm.

Fret Cutter

N° Art.: WSZ03 Marca: Göldo Unità: Netto PVI / cadauno: CHF 64.00
Perfect for trimming the ends of the fretwire.The jaws are specially hardened for fret work, and they're profiled and flush-ground to cut the wire close to the fretboard. Attention - do not use on stainless steel frets! Length 180mm, width at the jaws 27m

Fret End File, medium

N° Art.: WS001 Marca: Göldo Unità: Netto PVI / cadauno: CHF 58.00
A perfectly thought through custom file for finishing the fret ends. One side has a hollow fret file, whereas the sides are flat. The edges are rounded to avoid damage to the fretboard. Medium cut, suitable for most fretwires.

Fret File, large

N° Art.: WSF36 Marca: Göldo Unità: Netto PVI / cadauno: CHF 49.00
File for "crowning" the fret surface.

Fret File, medium

N° Art.: WSF35 Marca: Göldo Unità: Netto PVI / cadauno: CHF 49.00
File for "crowning" the fret surface.

Fret File, small

N° Art.: WSF34 Marca: Göldo Unità: Netto PVI / cadauno: CHF 49.00
File for "crowning" the fret surface.

Fret Polishing Rubber, #1000 (bag of 2 pieces)

N° Art.: WB1000 Marca: Göldo Unità: Netto PVI / cadauno: CHF 14.50
Easy and fast fret polishing tool. The rubber can be cut to individual size for any purpose. It adapts perfectly to the frets contour and keeps fingerboard damage to a minimum. Ideal for rounding the edges. Available in 150, 180, 400 und 1000 grid. Dimens

Fret Polishing Rubber, #180

N° Art.: WB180 Marca: Göldo Unità: Netto PVI / cadauno: CHF 14.80
Easy and fast fret polishing tool. The rubber can be cut to individual size for any purpose. It adapts perfectly to the frets contour and keeps fingerboard damage to a minimum. Ideal for rounding the edges. Available in 150, 180, 400 und 1000 grid. Dimens

Fret Polishing Rubber, #400 (bag of 2 pieces)

N° Art.: WB400 Marca: Göldo Unità: Netto PVI / cadauno: CHF 14.80
Easy and fast fret polishing tool. The rubber can be cut to individual size for any purpose. It adapts perfectly to the frets contour and keeps fingerboard damage to a minimum. Ideal for rounding the edges. Available in 150, 180, 400 und 1000 grid. Dimens

Fret Puller

N° Art.: WSZ02 Marca: Göldo Unità: Netto PVI / cadauno: CHF 73.00
Narrow front-cutting tool for pulling frets. It helps you pull the wire out of the slot step by step and minimizes wood chipping. Length 150mm, , width at the jaws 9mm.

Fret Sanding Rubber, #150

N° Art.: WB150 Marca: Göldo Unità: Netto PVI / cadauno: CHF 14.80
Easy and fast fret polishing tool. The rubber can be cut to individual size for any purpose. It adapts perfectly to the frets contour and keeps fingerboard damage to a minimum. Ideal for rounding the edges. Available in 150, 180, 400 und 1000 grid. Dimens

Fretboard Guard, 1 piece

N° Art.: WS045 Marca: Göldo Unità: Netto PVI / cadauno: CHF 2.50
Extremely thin stainless steel mask fits over one fret to protect the fingerboard, while you are filing, rounding or polishing a single fret.

Fretmaster

N° Art.: WS000 Marca: Göldo Unità: Netto PVI / cadauno: CHF 37.50
A precision file, specially made to level frets.

FROST Spray

N° Art.: WSCOOL Marca: Göldo Unità: Netto PVI / cadauno: CHF 10.50
To age nitrocellulose finishes. Frosts down in seconds to almost minus 50° Celsius. Be careful! Keep away from any other bodies than guitar bodies! 400ml spray can.

Guitar Nut Cube Minitool, stainless steel

N° Art.: WSGNC Marca: Göldo Unità: Netto PVI / cadauno: CHF 25.00
Five tools in one tiny tin cube - ingenious! This smart multitool belongs into every guitar tech's toolbox. 10mm, 11mm and 1/2" wrench for potentiometer nuts, a 16mm socket wrench and a multi-key for all kinds of toggle switches. Buy it!

Jack Bracket Spreading Tool, incl. Allen key

N° Art.: WSJTC Marca: Göldo Unità: Netto PVI / cadauno: CHF 10.50
Spreading Tool: Simple thing to fasten the bracket of the Tele vintage jack cup inside the jack hole.

Triple Edge Countersink, 10mm,

N° Art.: WS10S Marca: Göldo Unità: Netto PVI / cadauno: CHF 14.50
To enlarge any machine head holes to 10mm diameter. No sweat, no danger for the headstock, no rip!

Triple Edge Countersink, 6,3mm

N° Art.: WS63S Marca: Göldo Unità: Netto PVI / cadauno: CHF 11.50
Great to enlarge holes of diameter 6.0mm to 6.3mm in potentiometer buttons to fit to American pots. If you do that with a 6.3mm spiral drill it can be very dangerous!