Tone Control, Precence Control SPC fattens up single coils in mid range
| N° Art.: EMG-SPC | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 89.00 | Precence Control SPC fattens up single coils in mid range. Package Includes: Output jack and battery clip set. The SPC or "Strat Presence Control" is often called the fat control. The original intent of the SPC was to turn the tone of a single-coil pickup into a dual-coil. This is... |
Summing, Active Balance Control for active pickups (split shaft pot)
| N° Art.: EMG-ABC-SPL | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 85.50 | Active Balance Control for active pickups (split shaft). The ABC is an active EQ accessory that eliminates insertion loss and is designed to work with all our non-X series pickups that use a standard passive tone pot. Insertion loss is a naturally occurring yet frustrating phenomenon that... |
Convertion Kit for 3 PU's
| N° Art.: EMG-Conv-Kit-3 | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 79.00 |
All of the solderless components for install in one package! This kit includes everything needed for installation in a 3 pickup configuration with standard sized (Strat) potentiometers. This kit is for active pickups. |
ABQ Control, (for ALX Products)
| N° Art.: EMG-ABQ | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 79.00 |
Summing, X SERIES Active Balance Control for active pickups (split shaft pot)
| N° Art.: EMG-ABCX-SPL | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 72.50 | X SERIES Active Balance Control for active pickups (split shaft pot). The ABCX is an active EQ accessory that eliminates insertion loss and is designed to work with all our X series pickups that have an active tone pot. Insertion loss is a naturally occurring yet frustrating phenomenon that... |
Conversion Kit for 1 or 2 PU's, Push/Pull Pot
| N° Art.: EMG-Conv-Kit-1-2-PPP | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 68.00 | Conversion Kit for 1 or 2 PU's, Push/Pull Pot, with output jack, battery clips, potentiometers, cables, screws, switch and tips. |
Conversion Kit for 1 or 2 PU's with Longshaft Pots
| N° Art.: EMG-Conv-Kit-1-2-LS | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 56.00 | Conversion Kit for 1 or 2 PU's with Longshaft Pots, with output jack, battery clips, longshaft potentiometers, cables, screws, switch and tips. |
Conversion Kit for 1 or 2 PU's
| N° Art.: EMG-Conv-Kit-1-2 | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 56.00 |
For Models : H - HA - 55 - 58 - 60 - 60A - 81 - 85. Conversion Kit for 1 or 2 PU's, with output jack, battery clips, potentiometers, cables, screws, switch and tips. |
Spare Parts, Active Pickups Kit for Jazz Set configuration
| N° Art.: EMG-J-Set-Kit | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 56.00 | All of the solderless components for install in one package! This kit includes everything needed for installation in a Jazz Set configuration. This kit is for active pickups. Package Includes: 2 Volume Solid Shaft Pot - 1 Tone Solid Shaft Pot - 1 Pickup Buss - 1 Power Buss - 1 12b... |
Endpin Jack, Jack for Acoustic Guitar
| N° Art.: EMG-ENDPIN | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 49.00 |
Tone Control, Active Tone Bass Pot 25k, solid short shaft
| N° Art.: EMG-ATB-SOL | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 49.00 |
Piezo Buffer PB-2
| N° Art.: EMG-PB-2 | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 45.00 | The PB-2 Piezo pickup input is made with a coax cable, and output is made with 3 separate wires (output, ground, 9V+). |
Dual Mode Switch Kit
| N° Art.: EMG-DMSK | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 45.00 | The EMG-DMSK Dual-Mode Switch Kit allows you to simulate a single-coil sound with any EMG humbucking pickup. It utilizes a capacitor in series with the pickup output to naturally roll-off the low frequencies. For even greater flexibility, the kit includes three optional capacitors that allow you... |
Piezo Buffer PB-3
| N° Art.: EMG-PB-3 | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 45.00 |
|
Piezo Buffer PB-1
| N° Art.: EMG-PB-1 | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 45.00 | The PB-1 Piezo pickup input is made with a coax cable, and output is made to a 3-pin solderless header connection. |
Control Set - Strat, with Solid Shaft Pots & Switch
| N° Art.: EMG-CS-S-SOL | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 41.00 |
Control Set - Strat, with Split Shaft Pots & Switch
| N° Art.: EMG-CS-S-SPL | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 41.00 |
Toggle Switch 3-Position with ivory knob B289 & solderless cables
| N° Art.: EMG-SWITCH-3-POS-IVO | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 41.00 | The B289 switch is a low profile solderless 3 way toggle switch designed to fit standard Gibson style guitars. All switches use EMG’s "BNOG" connector arrangement and include 2 cables (short & long) for easy connection to EMG’s connection buss. Choose classic ivory knob or black. |
Toggle Switch 3-Position with black knob B289 & solderless cables
| N° Art.: EMG-SWITCH-3-POS-BLK | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 41.00 | The B289 switch is a low profile solderless 3 way toggle switch designed to fit standard Gibson style guitars. All switches use EMG’s "BNOG" connector arrangement and include 2 cables (short & long) for easy connection to EMG’s connection buss. Choose classic ivory knob or black. |
25k Push/Pull Potentiometer, Solderless, Split Long Shaft (for Les Paul)
| N° Art.: EMG-25kPPP-SLS | Marca: EMG | Unità: Pezzo | PVI / cadauno: CHF 38.00 | 25k Push/Pull Potentiometer, Solderless, Split Long Shaft (for Les Paul). For use with dual-mode pickups (89, 81TW etc.) |
